Steel Bracing
Brace member and gusset plate design per SBC 306
Verified module: SI units, SBC-referenced, deterministic, with documented verification metadata.
Code references
Inputs
| Parameter | Unit |
|---|---|
| Bracing System | — |
| Yield Stress Fy | MPa |
| Gross Area | mm² |
| Radius of Gyration | mm |
| Brace Length | mm |
| Effective Length Factor | - |
| Compression Demand | kN |
| Tension Demand | kN |
| Gusset Thickness | mm |
| Whitmore Width | mm |
| Gusset Fy | MPa |
Runs in the Insha by Schnell workspace. Verified calculators return explicit pass / fail / warning results with a clause trail.
Related calculators
Load Combinations
VerifiedLRFD & ASD load combinations per SBC 301 Chapter 2
Concrete Beam
VerifiedFlexure, shear, deflection check for rectangular and T-beams
Concrete Slab
VerifiedOne-way and two-way slab design with punching shear
Concrete Footing
VerifiedIsolated and combined footing design with bearing check
Steel Beam
VerifiedFlexural strength, lateral-torsional buckling, deflection
Steel Column
VerifiedCompression capacity with Fcr per SBC 306 Chapter E
Insha by Schnell is in beta. All calculator outputs require review by a licensed SCE-registered engineer before submission to MOMRA, Civil Defense, MODON, the Royal Commission, or site execution.
Frequently asked questions
- What does the Steel Bracing calculator do?
- Brace member and gusset plate design per SBC 306. It references SBC 306 (Saudi Code for Steel Structures).
- Which Saudi Building Code references does the Steel Bracing calculator use?
- The Steel Bracing calculator references SBC 306 (Saudi Code for Steel Structures).
- What inputs does the Steel Bracing calculator need?
- The Steel Bracing calculator takes 11 inputs: Bracing System, Yield Stress Fy (MPa), Gross Area (mm²), Radius of Gyration (mm), Brace Length (mm), Effective Length Factor, Compression Demand (kN), Tension Demand (kN), Gusset Thickness (mm), Whitmore Width (mm), Gusset Fy (MPa).
- Is the Steel Bracing calculator verified?
- Steel Bracing is a verified module: SI units, SBC-referenced, deterministic, with documented verification metadata. Like all Insha by Schnell outputs, its results require review by a licensed SCE-registered engineer before submission or site execution.