Retaining Wall
Cantilever retaining wall stability and structural design
Verified module: SI units, SBC-referenced, deterministic, with documented verification metadata.
Code references
Inputs
| Parameter | Unit |
|---|---|
| Total Wall Height | mm |
| Stem Thickness | mm |
| Toe Length | mm |
| Heel Length | mm |
| Base Thickness | mm |
| Backfill Unit Weight | kN/m³ |
| Friction Angle | ° |
| Allowable Bearing | kPa |
| Stem Concrete f'c | MPa |
| Reinf. fy | MPa |
| Stem Steel Area (per m) | mm² |
Runs in the Insha by Schnell workspace. Verified calculators return explicit pass / fail / warning results with a clause trail.
Related calculators
Load Combinations
VerifiedLRFD & ASD load combinations per SBC 301 Chapter 2
Concrete Beam
VerifiedFlexure, shear, deflection check for rectangular and T-beams
Concrete Slab
VerifiedOne-way and two-way slab design with punching shear
Concrete Footing
VerifiedIsolated and combined footing design with bearing check
Steel Beam
VerifiedFlexural strength, lateral-torsional buckling, deflection
Steel Column
VerifiedCompression capacity with Fcr per SBC 306 Chapter E
Insha by Schnell is in beta. All calculator outputs require review by a licensed SCE-registered engineer before submission to MOMRA, Civil Defense, MODON, the Royal Commission, or site execution.
Frequently asked questions
- What does the Retaining Wall calculator do?
- Cantilever retaining wall stability and structural design. It references SBC 304 (Saudi Code for Concrete Structures).
- Which Saudi Building Code references does the Retaining Wall calculator use?
- The Retaining Wall calculator references SBC 304 (Saudi Code for Concrete Structures).
- What inputs does the Retaining Wall calculator need?
- The Retaining Wall calculator takes 11 inputs: Total Wall Height (mm), Stem Thickness (mm), Toe Length (mm), Heel Length (mm), Base Thickness (mm), Backfill Unit Weight (kN/m³), Friction Angle (°), Allowable Bearing (kPa), Stem Concrete f'c (MPa), Reinf. fy (MPa), Stem Steel Area (per m) (mm²).
- Is the Retaining Wall calculator verified?
- Retaining Wall is a verified module: SI units, SBC-referenced, deterministic, with documented verification metadata. Like all Insha by Schnell outputs, its results require review by a licensed SCE-registered engineer before submission or site execution.