Precast Design
Precast concrete member design with prestress losses and bearing
Verified module: SI units, SBC-referenced, deterministic, with documented verification metadata.
Code references
Inputs
| Parameter | Unit |
|---|---|
| Member Type | — |
| Clear Span | mm |
| Member Depth | mm |
| Member Width | mm |
| Strand Area | mm² |
| Strand Ultimate Strength | MPa |
| Effective Prestress (after losses) | MPa |
| Concrete Strength | MPa |
| Depth to Prestress Steel | mm |
| Gross Moment of Inertia | mm⁴ |
| Gross Section Area | mm² |
| Self Weight | kN/m |
| Live Load | kN/m |
| Superimposed Dead Load | kN/m |
| Bearing Pad Length | mm |
| Bearing Pad Width | mm |
| Support Concrete Strength | MPa |
Runs in the Insha by Schnell workspace. Verified calculators return explicit pass / fail / warning results with a clause trail.
Related calculators
Load Combinations
VerifiedLRFD & ASD load combinations per SBC 301 Chapter 2
Concrete Beam
VerifiedFlexure, shear, deflection check for rectangular and T-beams
Concrete Slab
VerifiedOne-way and two-way slab design with punching shear
Concrete Footing
VerifiedIsolated and combined footing design with bearing check
Steel Beam
VerifiedFlexural strength, lateral-torsional buckling, deflection
Steel Column
VerifiedCompression capacity with Fcr per SBC 306 Chapter E
Insha by Schnell is in beta. All calculator outputs require review by a licensed SCE-registered engineer before submission to MOMRA, Civil Defense, MODON, the Royal Commission, or site execution.
Frequently asked questions
- What does the Precast Design calculator do?
- Precast concrete member design with prestress losses and bearing. It references SBC 304 (Saudi Code for Concrete Structures).
- Which Saudi Building Code references does the Precast Design calculator use?
- The Precast Design calculator references SBC 304 (Saudi Code for Concrete Structures).
- What inputs does the Precast Design calculator need?
- The Precast Design calculator takes 17 inputs: Member Type, Clear Span (mm), Member Depth (mm), Member Width (mm), Strand Area (mm²), Strand Ultimate Strength (MPa), Effective Prestress (after losses) (MPa), Concrete Strength (MPa), Depth to Prestress Steel (mm), Gross Moment of Inertia (mm⁴), Gross Section Area (mm²), Self Weight (kN/m), Live Load (kN/m), Superimposed Dead Load (kN/m), Bearing Pad Length (mm), Bearing Pad Width (mm), Support Concrete Strength (MPa).
- Is the Precast Design calculator verified?
- Precast Design is a verified module: SI units, SBC-referenced, deterministic, with documented verification metadata. Like all Insha by Schnell outputs, its results require review by a licensed SCE-registered engineer before submission or site execution.